Holmes HAP412 - Aer1 Total Air Filter Mini-Tower Air Purifier Manual

FEATURES - OPERATIONS

GET TO KNOW YOUR AIR PURIFIER

This unit is compatible with all Aer1^® Filters. This allows you to choose the filter that is just right for you. Below is information on each filter:
TOTAL AIR - Advanced Dust Eliminating Technology
ODOR ELIMINATOR - 10x the odor fighting power
ALLERGEN REMOVER - True HEPA technology improves air quality for allergy sufferers
ALLERGEN PERFORMANCEPLUS - True HEPA technology improves air quality for allergy sufferers.
SMOKE GRABBER - 99% effective at removing smoke from the air steam (*as small as 0.3 microns from air passing through the filter)

IONIZER

This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process.

What Are Ions?
Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and harmless.

How Does The Ionizer Work?
Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system.

Important Notes:
Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged.

After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer's air cleaning effectiveness. You can remove the dust with a soft brush or clean, damp cloth.

Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors.

• This may occur more frequently when the filter is nearing the end of its usable product life and is unable to capture as many charged particles.
• Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter and interfere with the ionization process.

To help prevent particles from attracting to surfaces throughout your home:

• You may want to run the ionizer less often.
• Check the condition of the filter more frequently.

The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the air purifier fan on.

HIGH, MEDIUM AND LOW SPEED SETTINGS

For optimum air filtration, operate your Holmes^® air purifier continuously on the MEDIUM () setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select the LOW () setting. When high levels of air pollution are present, select the HIGH () setting to quickly circulate and filter the room air.

BEFORE USE

1. Carefully unpack your Air Purifier. Select a firm level place where there are no obstructions to the air inlet or filtered air outlet.
2. Remove the air inlet grill and check if the filter is covered by a plastic bag. If it is, remove plastic bag before use and place filter into unit. Reinstall the air inlet grill.
3. DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.

OPERATING INSTRUCTIONS

1. AIR INLET GRILL
2. WASHABLE FOAM PRE- FILTER
3. Aer1 ® FILTER
4. FILTERED AIR OUTLET
5. IONIZER LIGHT
6. IONIZER CONTROL
7. SPEED CONTROL

1. Plug into a 120V AC electrical outlet.
2. Select the desired operating speed; HIGH (), MEDIUM (), LOW (), by turning Speed Control Knob to the appropriate setting. For optimum air filtration, it is recommended to operate the air purifier continuously.
3. To release negative ions into the filtered air, turn the ionizer control knob to ON () and the light will illuminate.
   NOTE: The ionizer will not work unless the nnit is running.

CLEANING/MAINTENANCE INSTRUCTIONS

Turn the air purifier off and unplug it before cleaning.

The outside of the air purifier can be cleaned with soft, clean damp cloth.

The air inlet grill (reference Fig. 1) can be removed and washed in warm soapy water (not dishwasher safe). Dry before replacing in the unit.

The filtered air outlet can be cleaned of dust with a small, soft brush.

If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down.

Do not allow moisture to come in contact with the main housing of the air purifier.

FILTER REPLACEMENT INSTRUCTIONS

• DO NOT attempt to wash and re-use the Aer1^® Filters.
• If the filters are enclosed in plastic bags, remove them before use.

NOTE:
Every few weeks, check the condition of filter. Filter life will vary, depending on air quality and usage (see below). Under normal conditions of continuous use, the Aer1^® Total Air, Odor and Smoke Filter will last 4 months while the Allergen Filter will last 12 months.

To replace your filter:

1. Turn off and unplug the air purifier.
2. Open the air inlet grill and examine the black foam prefilter. Remove any dust or lint and wash in warm soapy water. Rinse, drip dry and place back into grill inlet.
3. Remove the used Aer1^® filter from the unit by pulling it gently towards you and discard it. DO NOT attempt to clean the Aer1^® filter.
4. Install the new Aer1^® filter into the unit. This model utilizes a hang tab and filter clips to insure that the filter is properly in place. Before replacing the filter, make sure that the hang tab is securely in place. The clip can only be attached to the tabs on the filter one way. The filter clip should easily slide onto the filter hang tab with only a small amount of pressure. DO NOT use force while attaching the clip to the filter. (Fig. 2)
   
5. Align the clip on the side of Aer1^® filter with rails on the inside of the purifier unit. Gently slide the filter onto the rail. (Fig. 3)
   
6. Replace the inlet grill.

Filters can be purchased at a retailer near you, online at www.aer1filters.com, or by calling (855) Try-aer1.

TROUBLESHOOTING

TROUBLESHOOTING
Problem	Solution
Unit will not operate.	Check if unit is properly plugged in and outlet is energized. Make sure unit is turned ON. Make sure filter is properly installed and rear grill is seated correctly.
Decreased air flow.	Make sure nothing is blocking air inlet and filtered air outlets. Check condition of the filter and replace if necessary. Check filter for plastic wrapping/packaging.
Excessive Noise.	Make sure parts are firmly positioned in place. Open the air inlet grill, and make sure that any plastic packaging was removed from the filter, if applicable.

LEARNING MORE

For a wealth of information about your air purifier and other Holmes^® products, visit our website at www.holmesproducts.com or call 1-800-546-5637.

AER1 FILTER SERIES®

Congratulations! Your new air purifier is equipped with the new and improved Aer1^® Total Air Filter.

© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.

Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. The ARM & HAMMER^® name, logo and associated marks are trademarks of Church & Dwight Co., Inc. and are used under license by Sunbeam Products, Inc.