Advertisement
Vacuum Using an Accessory (not supplied)
1.
Insert one end of the vacuum hose into the accessory port on the vacuum sealer
and the other end into the port on the accessory. Note: Vacuum hose, accessories
and containers are not supplied.
2.
Press the Seal/Vac button to start vacuuming.
3.
When sealing is completed, the indicator will stop flashing. The vacuum hose can
now be disconnected from the vacuum sealer and the container.
Accessory hose
Note:
Leave at least a 3cm clearance between the food and the top of the container.
Seal/Vac
Advertisement
