Advertisement
Seal
The seal button is used to initiate the sealing process without vacuuming out the air from
the bag or container.
Press the seal button to start working, the indicator will begin flashing. When sealing is
completed, the indicator will remain on for 2s and then go out.
During vacuuming, press the seal button at any time to switch to the sealing.
Note:
Once the sealing process has been completed, the machine is forced to rest for 10s.
During this period, any button pressed will be invalid and result in an alarm (indicator
flashing for 3 seconds). After 10 seconds the appliance is ready for normal operation.
Pulse
The pulse function allows for manual control over the vacuuming process. When the pulse
button is pressed and held, the air pump starts to vacuum the air out of the bag or
container. This function enables you to control the level of vacuum by releasing the pulse
button when the desired amount of air has been removed.
Unlike the automatic vacuuming process, where the machine continues until a
predetermined level of vacuum is reached, the pulse function gives you more flexibility and
control. By releasing the pulse button, the air pump stops vacuuming, and you can check
the progress or adjust the vacuum level as needed.
The pulse function is particularly useful when dealing with delicate or fragile items that
require a gentler vacuuming process. It allows you to manually control the amount of air
removed, preventing damage to the item or excessive pressure on delicate contents.
Press and hold the Pulse button, the air pump will start to vacuum and the indicator light
will flash. When the button is released, the pump will stop vacuuming and the indicator
light will go out.
Stop
During operation, pressing the Stop button will stop the appliance immediately and return
to standby mode.
Advertisement
