Download Print this page

Advertisement

Quick Links

General Information
INTRODUCTION
This Sub-Zero Technical Service and Parts Manual (Job Aid Part #3752200) for the Model 506 Undercounter
Icemaker is a compilation of information provided by the Whirlpool Company and has been reprinted by Sub-Zero
Freezer Company, Inc., with the permission of the Whirlpool Company. This manual will provide the most recent
service information about the Model 506 Undercounter Icemaker. This information will enable the service technician
to diagnose malfunctions, perform necessary repairs and return a Model 506 appliance to proper operational status.
The service technician should read the complete instructions contained in this manual before initiating any repairs on
a Model 506.
IMPORTANT SAFETY INFORMATION
Below are Product Safety Labels used in this manual.
The "Signal Words" used are
When reviewing this manual, please note these differ-
ent Product Safety Labels placed at the beginning of
certain sections of this manual. You must follow the
instructions given in the boxes of the Product Safety
Labels in order to avoid personal injury and/or product
damage.
The sample Product Safety Labels below illustrate the
precautions that should be taken when the signal word
is observed.
INDICATES THAT HAZARDOUS OR UNSAFE
PRACTICES COULD RESULT IN SEVERE PERSON-
AL INJURY OR DEATH.
Indicates that hazardous or unsafe practices could
result in minor personal injury, and/or product
damage, and/or property damage.
In addition, please pay attention to the signal word
"NOTE", which highlights information that is especially
important for the topic being covered.
This manual is designed to be used by Authorized Service Personnel only. Sub-Zero Freezer Co., Inc.
assumes no responsibility for any repairs made on Sub-Zero refrigeration units by anyone other than
Authorized Service Technicians.
Information and images contained in this manual are the copyright property of Sub-Zero Freezer Company, Inc.
Neither this manual nor any information or images contained herein may be copied or used in whole or in part
without the express written consent of Sub-Zero Freezer Company, Inc.
#3752200 - Revision B - May, 2006
Model 506 (UC Ice Maker)
Model 506 (UC Ice Maker)
WARNING
or CAUTION.
© Sub-Zero Freezer Company, Inc, all rights reserved.
TECHNICAL ASSISTANCE
If you should have any questions regarding the 506
Series and/or this manual, please contact:
Sub-Zero Freezer Company, Inc.
ATTN: Service Department
Madison, WI 53744 - 4988
Customer Service & Parts / Warranty Claims
Phone #: (800) 222 - 7820
Technical Assistance
Phone #: (800) 919 - 8324
Customer Service & Technical Assistance
Facsimile #: (608) 441 - 5887
Parts / Warranty Claims
Facsimile #: (608) 441 - 5886
Service Department E-Mail Address:
customerservice@subzero.com
7:00 AM to 7:00 PM Central Time
Monday through Friday
1-2
P.O. Box 44988
Office Hours:

Advertisement

loading

Summary of Contents for Sub-Zero 506

  • Page 1 Model 506 (UC Ice Maker) INTRODUCTION This Sub-Zero Technical Service and Parts Manual (Job Aid Part #3752200) for the Model 506 Undercounter Icemaker is a compilation of information provided by the Whirlpool Company and has been reprinted by Sub-Zero Freezer Company, Inc., with the permission of the Whirlpool Company. This manual will provide the most recent service information about the Model 506 Undercounter Icemaker.
  • Page 2: General Information

    TEM warranty, sealed system **parts only. Warranty Notes: ONE & FIVE YEAR Non-Residential Warranty • Sub-Zero Freezer Company, Inc. assumes no liability Summary (Example: Office, Yacht, etc.) or responsibility for Sub-Zero products that have been • One Year TOTAL PRODUCT warranty, *parts and altered in any way, including the use of parts and/or labor.
  • Page 3: Installation And Maintenance

    Installation & Maintenance Model 506 (UC Ice Maker) Model 506 (UC Ice Maker) Pre-Installation Considerations ELECTRIC SHOCK HAZARD Location IMPROPER CONNECTION OF THE EQUIPMENT The unit may be closed in on the top, rear and both GROUNDING CONDUCTOR CAN RESULT IN A sides, but the front must be unobstructed for air circula- RISK OF ELECTRICAL SHOCK.
  • Page 4 Installation & Maintenance Model 506 (UC Ice Maker) Model 506 (UC Ice Maker) Water Connection Requirements Installation of Line Tapping Device and/or Shut-off Valve Materials needed for installation: 1. Select the point on an active cold water supply line 1/4-in. O.D. copper tubing convenient to the unit where connection is to be 1/4-in.
  • Page 5 Installation & Maintenance Model 506 (UC Ice Maker) Model 506 (UC Ice Maker) Drain Connection Requirements RIGHT END VIEW The ice maker has a gravity drain. The ideal installation 23-7/8” 3/4” has a standpipe (1-1/4-in. minimum) installed directly below the outlet of the drain tube.
  • Page 6 Installation & Maintenance Model 506 (UC Ice Maker) Model 506 (UC Ice Maker) How It Works (Continued) Up & Out to When the pump is in harvest cycle, the electric circuit Drain bypasses the pump pressure switch, and the pump runs continuously.
  • Page 7 Installation & Maintenance Model 506 (UC Ice Maker) Model 506 (UC Ice Maker) Installing the Unit Screws 1. Lay carton on its rear face and break open the bot- tom flaps. 2. Set the carton upright with all four flaps outward.
  • Page 8 Installation & Maintenance Model 506 (UC Ice Maker) Model 506 (UC Ice Maker) 13. Local sanitation codes may require that the ice Screws maker cabinet is sealed to the floor with an approved caulking compound. Handle If the ice maker is installed in restaurant, local...