Accessing The Graphics User Interface (Gui)- Ibsu Web - Iridium Pilot BUG1501 User Manual

3.3 Accessing the Graphics user Interface (GUI)– IBSU Web Pages
To access the IBSU Web Pages:
1. Connect a PC to the data port on the BDE
2. Open the web browser and in the web browser address window, type: http://192.168.0.1.
Note: The default IP address is assigned to the IBSU at the factory. The IP address can be changed if there are
multiple IBSU's at a single site. If this has been done, then type in the new IP address. To reset the IP address
back to the default (192.168.0.1), press the network reset button on the BDE.
Figure 3.2
Reset button
3. Select "Login" for administrator level diagnostics. Type in the user name and password specified by Iridium.
Call your Service Provider if login fails.
4. Select the appropriate link:
Select to link to:
• Status
• Counters
• Diagnostics
Note: The information displayed on the web pages is not dynamically updated. To update the information,
refresh the web page from you browser.
19
Iridium Pilot User Manual