Table of Contents
Advertisement
FITTING AND REMOVING FIXED GUIDE COMBS: To Fit
• Hook the front of the guide comb over the teeth of the wide trimmer.
• Press the back of the guide comb down until it clicks into place.
FITTING AND REMOVING FIXED GUIDE COMBS: To Remove
• Lift the tab on the back of the guide comb upwards until it comes free
from the wide trimer head.
FITTING AND REMOVING THE ADJUSTABLE COMB
• To fit, line up the rails on the comb with the slots on the sides of the
groomer and slide the comb downwards onto the groomer.
• To adjust, press and hold the adjustment button on the back of the comb
and slide the comb up or down. Release the button to lock the comb at
that position. The length of cut is indicated by the scale on the side of the
trimmer.
• To remove, press and hold the adjustment button and push the comb up
and off the groomer.
GROOMING TIPS
•
Comb facial hair with a fine comb before you start trimming.
•
Comb your hair in the direction that it grows so that the hairs are at
their maximum height and facing in the same direction.
•
After trimming, lightly go over the trimmed areas with the foil to get a
smooth clean finish.
•
Since all hairs do not grow in the same direction, you may want to try
different trimming positions (i.e. upwards, downwards or across) for
better results.
•
Hair should be dry and free from any waxes or lotions.
•
If hair builds up during use, switch the unit off, remove any attachment
in use and clean any excess hair clippings from the attachment and
groomer.
7
Advertisement
Table of Contents
