Table of Contents
Advertisement
Note: The Adjustable Comb Attachments have various length settings.
When first becoming familiar with your G4 Graphite Series Multi Groom Kit,
begin with a higher numbered setting. Adjust cutting length, as desired.
ABOUT YOUR GROOMER
PG4000AU SPECIFICATIONS
Power System
Full Charge Time
Run Time
Indicators
Voltage Type
Voltage Type: Worldwide Voltage - groomer automatically adapts to and
outlet voltage between 100V and 240V.
Note: Some countries will require the use of a plug adaptor that is not
included with your groomer.
CHARGING
This appliance can be used 'cordless' by powering it from its internal
rechargeable battery, or 'corded' by connecting it to the charging adaptor
and then the mains power supply. Powering the appliance from the
charging adaptor is useful if the rechargeable battery does not have enough
charge. Be aware however, that frequent use of the cordless mode will
reduce the life of the rechargeable battery.
Before using your trimmer for the first time, charge for 10 hours.
1.
1. Ensure the product is switched off.
2.
2. Connect the charging adaptor to the product and then to the mains.
•
When charging, the charge indicator light will light up. The light will go
out when charging is complete.
•
Your trimmer cannot be overcharged. However, if it is not going to be
used for an extended period of time (2-3 months), unplug it from the
mains and store.
•
To preserve the life of your batteries, let them run out every 6 months
then recharge for 10 hours.
•
On a full charge, your beard trimmer will run for up to 60 minutes of
cordless usage.
Cord/Cordless
10 Hours
60 Minutes
LED
Worldwide
5
Advertisement
Table of Contents
