Advertisement
INSTALLER GUIDE
4. STOVE SET UP
Standard legs:
We recommend that the two legs with fixing holes be fitted to the back of the stove for
neater appearance. If the hearth is uneven, fit one or more extra washers between any
leg and the stove body to extend the leg.
Lower front casting.
Attach the lower front casting to the front underside of the stove using the screws and
washers supplied.
Flue Collar, Deflector, Diverter Box and Flue Restrictor Plate.
1. These should be assembled to the stove as in figure 2. We recommend that the rear
bolt is fitted first for ease. The front bolt that secures the deflector must be tight and the
top of the deflector MUST be sealed against the top of the stove casting.
Figure 2.
2. The Thermal Switch should be fitted to the inside of the Diverter Box as in figure 3.
Secure using the nut and bolt supplied. Never modify the fixing bracket and always
ensure that the switch is fitted correctly. NEVER USE THE STOVE IF THE
THERMAL SAFETY SWITCH HAS BEEN REMOVED OR IF IT IS DAMAGED IN
ANY WAY.
©
Baxi Heating U.K. Limited 2006.
Page 6
Advertisement
