Advertisement
3. Unpack the burner module.
Secure the control knob assembly to the gas valve, the screw tail should secure onto
!
the flat on the gas valve spindle.
Offer the burner module into the stove and connect the thermal switch leads to the
!
tags mid way along the thermocouple.
Locate the burner assembly inside the stove body as in figure 4 (The outer body of
!
the stove is not shown for clarity). The rear leg of the burner should sit in the recess at
the rear of the casting and on top of the two lugs that protrude. Secure using the screws
supplied.
Figure 4.
©
Baxi Heating U.K. Limited 2006.
INSTALLER GUIDE
Figure 3.
Page 7
Advertisement
