Advertisement
INSTALLER GUIDE
This product uses fuel effect pieces containing Refractory Ceramic Fibres (RCF),
which are man-made vitreous silicate fibres. Excessive exposure to these materials
may cause irritation to eyes, skin and respiratory tract. Consequently, it is
important to take care when handling these articles to ensure that the release of
dust is kept to a minimum. To ensure that the release of fibres from these RCF
articles is kept to a minimum, during installation and servicing we recommend that
you use a HEPA filtered vacuum to remove any dust and soot accumulated in and
around the stove before and after working on the stove. When replacing these
articles we recommend that the replaced items are not broken up, but are sealed
within a heavy duty polythene bag, clearly labelled as RCF waste. RCF waste is
classed as a stable, non-reactive hazardous waste and may be disposed at a landfill
licensed to accept such waste. Protective clothing is not required when handling
these articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area and always wash your hands before
eating or drinking. This appliance does not contain any component manufactured
from asbestos or asbestos related products.
The appliance data label is located on a plate at the base of the stove.
3. UNPACKING
Before installation, check that the following components, where required, have been
delivered.
Loose parts box - Contains the Deflector, Flue Collar, Diverter box, 4 Feet, 2 handles
of different colour, Fire bar, Lower front casting, Bottle of touch-up paint, 2 floor
securing screws and plugs, Bolts and Screws.
Stove body - Contains the Stove body with Hexagonal key, Restrictor Plate and
securing bolts.
Contained in the stove body are two boxes as
below. To access these, insert the required handle
into the door latch, unlock the lock nut at the
side of the latch using the Hexagonal key and
turn the handle clockwise (See figure 1).
Box 1 - Contains the burner assembly, the flue
safety switch and leads assembly, the inlet 'T'
connector, the control knob assembly and burner
securing screws.
Box 2 - Contains the ceramic fuel effect.
Figure 1.
©
Baxi Heating U.K. Limited 2006.
Page 5
Advertisement
