Honda TRX420TE 2010 Owner's Manual page 202

If You Have a Flat Tire
Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
−
2. Loosen but do not remove
3. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
Avoid getting grease, oil, or dirt on the front brake disc or pad
surfaces when removing and installing each wheel. Any
contamination can cause poor brake performance or rapid pad wear
after reassembly.
Taking Care of the Unexpected
194
on page 89
(1)
−
the wheel nuts ( ).
.
(1)
(2)
(2) wheel rim
1