Home Theater Master MX700 Manual page 52

46
4 Program activity macros normally on all the MAIN page 2 buttons.
5 On Main Page 1, import the corresponding Macro from Page 2 to each LCD button on Page 1:
U
S
I
N
G
M
6 Add a page jump to each of the MACROs on MAIN Page 1 to the Devices with the IR Codes programmed
X
in them:
E
D
I
T
O
R
T
O
P
R
O
7 In operation, the only inconsistency that occurs is that if the client goes to MAIN page 2 and operates
G
from there, they will not get the status message during the macro.That will probably be rare, so this is a
R
fairly workable strategy for impatient clients.
A
M
Advanced Programming Techniques and Ideas
As you can see, when you pull
down the list of devices, there
are two of each device.
You want to create a jump to
the second device on the list,
they are the page 2 devices
with codes, rather than the ten
phony devices you created with
status messages.