Installing The Stand - Hisense 75S8 Quick Setup Manual

Installing the Stand or Wall Mount Bracket

Installing the Stand

CAUTION
Be sure to disconnect the A/C power cord before removing a base stand or
installing Wall-Mount brackets.
The screen display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the screen display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
Follow the illustrations and textual instructions below to complete the installation steps:
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
Tip: Make sure to insert the stands according to the 'L' and 'R' directional marks
that are shown on the surface.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
BASE STAND
Screws:
M5×16
2
Screws:
M5×16
BASE STAND