Installing The Stand - Hisense 70A6G Quick Setup Manual

Installing the Stand or Wall Mount Bracket
CAUTION
Be sure to disconnect the AC power cord before installing a stand or wall mount
brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Please use the matching screws in the accessory bag to fix the base to avoid
damaging the TV.

Installing the Stand

Follow the illustrations and textual instructions below to complete the installation steps:
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
Base Stand
Screws：
M5×12
2
Screws：
M5×12
Base Stand