Installing The Wall Mount Bracket - Hisense 75S8 Quick Setup Manual

Installing the Stand or Wall Mount Bracket

Installing the Wall Mount Bracket

Before you begin the installation of the wall mount bracket , be sure to do the following
things:
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Remove the TV stand if you already attached it.
3. Remove the two screws (as shown in the following figure) on the handle first, and
remove the handles, then remove the two screws at the bottom of the back.
4. Then install according to the instructions provided with the wall mount bracket.
CAUTION:
• When you attach the mount, be sure to use spacers between the TV and the bracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be
sure to use fixing screws that are 9.5 - 11.5 mm in length when measured from the
attaching surface of the rear cover.
Wall-Mount hole pattern (mm)
Wall-Mount screw size
Screws to remove
600 × 300
M6
3