Set Static Ip - Asus Aaeon SRG-4858P User Manual

3.3.2

Set Static IP

Step 1: Enter edit mode with the following command:
$ nmcli con edit
See table in 3.3.1 for NETWORKPROFILE values
Command should return the following
Step 2: Edit the IP Address with the following commands:
$ nmcli> goto ipv4
$ nmcli> set address IPADDRESS/24
IPADDRESS
$ nmcli> save
$ nmcli> quit
You have now exited the edit mode.
$ sudo ifconfig
$ sudo ifconfig
PORT variables are eth0 for Ethernet0 or eth1 for Ethernet1; this example
uses eth0.
The following will be returned:
Chapter 3 – Gateway Setup and Configuration
NETWORKPROFILE
(Ethernet0
is the address you wish to use. This example uses
PORT down
PORT up
used in this example):
192.168.3.127
16