Advertisement
DC Current
Range
Resolution Accuracy Overload protection
200mA
0.1mA
±(0.8%+5)
10A
10mA
±(1.2%+5)
Diode
Range
Resolution Overload protection
1mV
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
Battery Removal: See Section 5.3.
ONLY dispose of or recycle according to local authority regulations. Under the Waste Batteries and Accumulators Regulations
2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these
regulations), that they are registered with Valpak's registered compliance scheme. Jack Sealey Ltd's Batteries Producer
Registration Number (BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
CE: Fuse 315mA,
250V, fast type,
5x20mm
CE: Fuse 10A, 250V,
fast type, 5x20mm
600Vp
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Dwell testing
Range Resolution Accuracy Overload protection
4CYL
6CYL
0.1º
±(3%+5)
8CYL
Input amplitude: ≥ 10V in direct impulse; ≥ 0.5mS in width.
Tach (rotation speed) testing
Range Resolution Accuracy Overload protection
4CYL
10RPM
±(3%+5)
6CYL
8CYL
Input amplitude: ≥ 10V in direct impulse; ≥ 0.5mS in width.
Maximum tach: 10000 RPM, displayed as RPM x10.
01284 757500
01284 703534
TA200.V2
600Vp
600Vp
www.sealey.co.uk
sales@sealey.co.uk
Issue No: 1 - 15/08/16
Advertisement
