Maintenance - Motor Trike GTX-1200 Owner's Manual

4. Press and hold the horn button. The horn should not sound.
5. Check that there is a clear path behind you. And announce that you are backing up to anyone
nearby.
6. Press the start button to back up. Warning: Always check that the bike is in neutral, the
activation switch is illuminated, and press and hold the horn button before pressing the
start button. If the horn sounds, do not press the start button. This could cause damage to your
motorcycles starting system.
7. Disable the reverse by switching the activation switch off. The function of your horn and start
buttons are returned to normal. The red indicator light on the activation switch should be off.
Repeated use without charging time, stalling the reverse for too long or other abuse will cause the
integrated circuit breaker(s) to trip. They are located under the seat and must be manually reset for the
reverse to function again. Warning: The breakers will not protect the reverse against all forms of
abuse. Be sure to follow the guidelines outlined in this manual. If the breakers flip, the reverse is
being used far and above its intended use. Repeated operation of this nature will void the warranty
for the electric reverse system. See Figure 8 for instructions on resetting the breaker(s). If you have style
A there are two breakers. If you have style B there is only one breaker.

MAINTENANCE

If your vehicle requires professional services, Motor Trike has an extensive dealer network with
specially trained technicians capable of servicing or repairing your vehicle. To locate the authorized
Motor Trike dealer nearest you, go to the Motor Trike web site (WWW.MOTORTRIKE.COM) and
access the Dealer Locator link. To help ensure your vehicle is serviced at the proper intervals, we have
included a maintenance schedule found below in Table 7.
Revision 3
STYLE A
Figure 8: Resetting the Reverse Breaker(s)
STYLE B
Page 11 of 14