D-Link DIR-853 Quick Installation Manual page 25

Ac1300 wave 2 mu-mimo wi-fi gigabit router with 3g/lte support and usb port

Hide thumbs Also See for DIR-853:

Table of Contents

DIR-853

Quick Installation Guide

In order to connect your device to the network of a 3G or LTE operator, on the

Device mode page, from the Connection method list, select the

Autonomous value. Then from the Work mode list, select the Mobile

Internet value. In this mode you can configure a 3G/LTE WAN connection,

set your own settings for the wireless network in the 2.4GHz and 5GHz bands,

and set your own password for access to the web-based interface of the device.

In order to connect your device to a wireless ISP (WISP), on the Device

mode page, from the Connection method list, select the Autonomous

value. Then from the Work mode list, select the WISP Repeater value. In

this mode you can connect your device to another access point, configure a

WAN connection, set your own settings for the wireless network in the

2.4GHz and 5GHz bands, and set your own password for access to the web-

based interface of the device.

Table of Contents