Residual Risks - Black & Decker KR911 Original Instructions Manual

b. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c. Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g. Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5. Service
a. Have your power tool serviced by
a qualifi ed repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Additional power tool safety warnings
Warning! Additional safety warnings for
drills and impact drills
♦
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
♦
Use auxiliary handles supplied with the
tool. Loss of control can cause personal
injury.
♦
Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock
♦
Never use a chisel accessory in rotary mode.
The accessory will bind in the material and
rotate the drill.
♦
Use clamps or another practical way to
secure and support the workpiece to a stable
platform. Holding the work by hand or against
your body leaves it unstable and may lead to
loss of control.
♦
Before drilling into walls, fl oors or ceilings,
check for the location of wiring and pipes.
♦
Avoid touching the tip of a drill bit just after
drilling, as it may be hot.
♦
The intended use is described in this
instruction manual. The use of any accessory
or attachment or performance of any
operation with this tool other than those
recommended in this instruction manual
may present a risk of personal injury and/or
damage to property.
Safety of others
♦
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.
♦
Children should be supervised to ensure that
they do not play with the appliance.

Residual risks.

Additional residual risks may arise when using the
tool which may not be included in the enclosed
safety warnings. These risks can arise from
misuse, prolonged use etc.
Even with the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks can not be avoided.
These include:
♦
Injuries caused by touching any rotating/
moving parts.
♦
Injuries caused when changing any parts,
blades or accessories.
♦
Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
♦
Impairment of hearing.
♦
Health hazards caused by breathing dust
developed when using your tool (example:-
ENGLISH
5