CeraGem CGM EB-1101 User Manual page 15

2. Check before product installation
1. Install where the ground is flat to avoid the risk of damaging the product.
2. Try and avoid installation where there is a lot of humidity or dust.
(To avoid risking electric shocks or fire.)
3. Install according to the designated order.
4. When installing, check that the rated voltage is 220-240V~.
(To avoid circuit damage or fire.)
5. Do not drop the product or apply any force to it.
(This could cause malfunctioning.)
6. Do not use damaged power cords, plugs or old sockets.
7. You must connect to a socket with a connection terminal.
(To avoid risking electric shocks.)
13