Keychron K11 Pro Quick Start Manual page 2

3
The VIA Key Remapping Software
Please visit caniusevia.com to download the
latest VIA software to remap the keys.
If the VIA software cannot recognize your
keyboard, please reach out to our support
to get the instruction. (VIA only works when
the keyboard is connected by wire to the computer.)
5
Multimedia Key and Function Key
Multimedia keys
In order to get Multimedia Key, you need to press fn1 and
In order to get Function Key, you need to press fn2 and
7
Adjust The Backlight Brightness
Press fn1 + S to increase the backlight brightness
fn1 + S
9
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
Your keyboard's best friend
Function keys
Key.
Key.
Press fn1 + X to decrease the backlight brightness
fn1 + X
4
The Layers
There are five layers of key settings on the keyboard.
The layer 0 is for the Mac system. The layer 1 is for the
Windows system. The layer 2 is for the Mac Multimedia
keys. The layer 3 is for the Windows Multimedia keys.
The layer 4 is for the Function keys.
Mac Windows Multimedia
Win
LAYER 0 1
Mac Multimedia
6
The Backlight
Press fn1 + A to change the lighting effect
fn1 + A
8
Warranty
The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components
of keyboard during the warranty period, we will only replace
the defective parts of the keyboard, not the whole keyboard.
10
Factory Reset
Not Happy
support@keychron.com
If your system toggle is switched
to Mac, then the layer 0 will be
activated.
Mac Win
Function
2 3 4
LAYER 0 1 2 3 4
Press fn1 + caps lock to turn the backlight on/off
fn1 + caps lock
Troubleshooting? Don't know what's going on with the keyboard?
① Plug in the power cable and switch the keyboard to Cable mode.
② Factory reset the keyboard by pressing fn2 + J + Z (for 4 seconds).
③ Download the right firmware and QMK Toolbox from our website.
④ Switch the keyboard to OFF mode and remove the space bar keycap
to find the reset button on the PCB.
⑤ Hold the reset key first, then switch the keyboard to Cable mode.
Release the reset key, and the keyboard will now enter DFU mode.
⑥ Flash the firmware with the QMK Toolbox.
⑦ Factory reset the keyboard again by pressing fn2 + J + Z (for 4 seconds).
Step by step guide can be found on our website.
If your system toggle is switched
to Windows, then the layer 1 will be
activated.
Mac Win
LAYER 0 1 2 3 4