Bosch KI20F Series User Manual page 31

Fault
The cool-fresh
compartment is too
warm or too cold.
Possible cause
The fixed setting has
been set too high
or too low (e.g. if there
is frost in the "cool-
fresh" compartment).
Remedial action
The temperature in the cool-fresh
compartment can be set warmer and/or
colder.
Setting the temperature:
Fig. 2
1. Switch off the appliance with the
On/Off button 1.
2. Simultaneously hold down On/Off
button 1 and temperature setting
button 2 for approx. 2 seconds.
"88" is lit on temperature display 4.
When the temperature display goes
out, release buttons.
3. The temperature levels appear
on the temperature display 4.
Temperature levels:
Setting 0 – coldest setting
■
Setting 6 – warmest setting
■
Setting 4 – factory setting
■
(almost 0 °C)
4. Keep pressing temperature setting
button 2 until the required
temperature level is displayed.
The set temperature is saved after
one minute. The display switches
to the set refrigerator compartment
temperature.
Notes
The numbers on the display do not correspond
■
to °C temperatures in the "cool-fresh"
compartment.
If the temperature display is not flashing,
■
the buttons were inadvertently pressed
for longer. Switch off the appliance again and
repeat the process as described above.
en
31