HIKVISION DS-2CD2332-I Quick Start Manual page 39

Network Turret Camera·Quick Start Guide
3. Place the O-type gasket ② onto the end of the camera's
network interface socket ①.
4. Insert the network plug ③ into the camera's network interface
socket ①.
5. Insert the waterproof rubber gasket ⑤ into the waterproof
endcap ④, and secure lock nut ⑥ with the waterproof
endcap ④.
6. Align the snap on the waterproof endcap ④ with the notch on
the camera's network interface socket ①, and then secure the
waterproof endcap ④ to the camera's network interface
socket ① to finish installation.
Camera
Figure 2-38
Align the snap and notch.
i. Insert
ii. Secure
Waterproof Accessory Installation
38
into .
⑤ ④
with .
⑥ ④
Switch/Router