Troubleshooting - Bosch BRC3600 Owner's Manual

Led remote
Hide thumbs Also See for BRC3600:
Table of Contents

Advertisement

Available languages

Available languages

English – 14
The operating unit shows whether critical errors or
less critical errors occur on the eBike.
The error messages generated by the eBike can be
read via the eBike Flow app or by your bicycle re-
tailer.
Via a link in the eBike Flow app, information about
the error and support for rectifying the error can be
displayed.
Less critical errors
Less critical errors are shown by the assistance level
LED (5) flashing orange. Pressing the select but-
ton (7) confirms the error and the assistance level
LED (5) once again continuously shows the color of
the set assistance level.
You can use the following table to rectify the errors
yourself if necessary. Otherwise, please contact your
bicycle retailer.
Number

Troubleshooting

523005
The indicated error numbers show that
there is interference when the sensors
514001
detect the magnetic field. See whether
514002
you have lost the magnet while riding.
514003
If you are using a magnet sensor, check
514006
that the sensor and magnet have been
properly installed. Make sure too that
the cable to the sensor is not damaged.
If you are using a rim magnet, make
sure that you do not have any magnetic
field interference in the vicinity of the
drive unit.
Critical errors
Critical errors are indicated by the assistance level
LED (5) and the battery charge indicator of the eBike
battery (3) flashing red. If a critical error occurs, fol-
low the handling instructions on the following table.
0 275 U07 3RL | (08.03.2023)
Troubleshooting
Number
660002
6A0004
890000
Handling instructions
Please do not charge or use your bat-
tery any further.
Please contact your specialist retailer.
Remove the PowerMore battery and
restart your eBike.
If the problem persists, please contact
your specialist retailer.
– Acknowledge the error code.
– Restart the eBike system.
If the problem persists:
– Acknowledge the error code.
– Perform the software update.
– Restart the eBike system.
If the problem persists:
– Please contact a Bosch eBike sys-
tems specialist retailer.
Bosch eBike Systems

Advertisement

Table of Contents
loading

Table of Contents