Description of a screen page ......................... 9 Access to parameters ..........................10 Description of symbols displayed on the screen ..................10 Setting EcoStar Info device ........................11 Setting EcoStar Auto device........................13 Setting the clock ............................16 Use with added oxygen (optional) ....................17 Installation with an oxygen adapter (optional) ..................
Intended use sinus, bloating, daytime drowsiness, mood changes, disorientation, irritability or memory The EcoStar Info and EcoStar Auto devices are loss. Positive Pressure devices indicated for the mask treatment Obstructive...
Description of the device The EcoStar Info or EcoStar Auto device is powered by an external electrical power supply module and comes with specific accessories Views of the Device this allows information such as the pressure delivered and the device Display settings or the clock to be viewed.
Direct current. Device complies with Specific warning (see "Safety requirements of European Directive instructions" page 3). 93/42/EC on medical devices. Refer to the user manual. Recording and play back. Keep dry. 6 Description of the device EcoStar Info, EcoStar Auto...
Then continue with steps 2 through 5 of the standard installation procedure. Installation for use with cigarette-lighter cable The EcoStar Info or EcoStar Auto device can be powered from a cigarette-lighter socket using the optional cable specially designed for this purpose.
Available features The EcoStar Info device operates in continuous mode, whereas the EcoStar Auto operates either Note: in constant mode (CPAP) or in automatic mode...
"Description of symbols displayed on the screen" page 10). 2. Press the ramp button to turn off the ramp function. You can reactivate it by stopping and restarting the device using the on/off button EcoStar Info, EcoStar Auto 9...
Information message Error message Note: The EcoStar Info or EcoStar Auto device is shown in standby mode in the setting access sequence below and all the values displayed are given by way of example. 10 EcoStar Info, EcoStar Auto...
This functionality allows to automatically start the treatment without pressing the button This screen appears: Press Comfort Calibration enabled (1) during the ramp continuously or disabled (0) by your home care provider. EcoStar Info, EcoStar Auto Setting EcoStar Info device 11...
Page 12
; it can be enabled (1) or disabled (0) by your home care provider. Press This screen appears: Integrated software version of the device. Press the information access button again to exit the parameter settings menu. 12 Setting EcoStar Info device EcoStar Info, EcoStar Auto...
Ramp time (in CPAP mode) or latency time (in APAP mode) when the time ramp is selected, otherwise this parameter is not displayed. symbol indicates that you can raise or lower the value displayed by using the button EcoStar Info, EcoStar Auto Setting EcoStar Auto device 13...
Page 14
Press This screen appears: Speed of pressure decrease, available in APAP mode only. The slow (S) of fast (F) speed is set by your home care provider. 14 Setting EcoStar Auto device EcoStar Info, EcoStar Auto...
Page 15
When you exit the settings menu, the display returns to one of both following screens showing the status of your device: The device is in standby. The device is in operation. EcoStar Info, EcoStar Auto Setting EcoStar Auto device 15...
The symbol of minute min blinks in turn. You can set the minutes by following the same procedure as for the hour. Press the information access button to exit the menu. 16 Setting the clock EcoStar Info, EcoStar Auto...
The maximum flow of oxygen used must not exceed 12 l/min. 1. It is essential that the EcoStar Info or EcoStar Auto device is turned on and generating air flow before the oxygen flow is started so that CAUTION oxygen does not accumulate in the device.
Auto-CPAP mode. prescription. If the pressure delivered by the device seems to have changed, contact your home care provider to have the device pressure checked. EcoStar Info, EcoStar Auto Trouble-shooting 19...
Otherwise, the device will stop after 30 minutes. Er XX The device has detected an Contact your home care provider. operating fault. (XX = 2 digits). 20 Trouble-shooting EcoStar Info, EcoStar Auto...
(7.9 x 5.7 x 3.1 ins approx.) Weight: 0.750 kg without power Temperature : -20°C à +60°C supply module (-4 °F to +140 °F) (1.65 lbs approx.) Relative humidity: up to 95% without condensation EcoStar Info, EcoStar Auto Technical characteristics 21...
Directive The EcoStar Info and EcoStar Auto devices comply with 2012/19/EU, and must be collected and the following directives and standards: processed separately from household waste ...
Page 24
Home care Provider Information Manufacturer: Manufacturing plant: SEFAM SEFAM 144 AV CHARLES DE GAULLE 10 ALLEE PELLETIER DOISY 92200 NEUILLY SUR SEINE 54600 VILLERS-LES-NANCY FRANCE FRANCE : M-159DFU01-80 Revision 5 2016-06...
Need help?
Do you have a question about the EcoStar Info and is the answer not in the manual?
Questions and answers