Part List - Kenwood DPX305MBT Quick Start Manual

Part list

(Parts supplied for )
(A) Mounting sleeve (×1)
(B) Trim plate (×1)
(C) Trim plate (only for Toyota car) (×1)
(D) Extraction key (×2)
Installing the unit (without mounting sleeve)
Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with supplied screws.
• For : Remove the mounting sleeve and trim plate from the
unit.
Use only the specified screws. Using wrong screws might damage the
unit.
Removing the unit
(For )
(Parts supplied for all models)
(E) Round head screw (×6)
(M5 × 8 mm)
(F) Flat head screw (×6)
(M5 × 8 mm)
(G) Wiring harness (×1)
Wiring connection
Fuse (10 A)
Car fuse box
a Brown: Connect to the device
equipped with muting feature
to mute this unit
b Blue/white: To the power
control terminal when using
the optional power amplifier or
to the antenna control terminal
in the vehicle
c Light blue/yellow: To the
steering wheel remote control
adapter
Antenna terminal
If no connections are made, do not let
the wire come out from the tab.
Ignition switch
d Red: Ignition 12 V
e Yellow: Battery 12 V
f Black: Ground
g White ª, White/black ·:
Front speaker (left)
h Gray ª, Gray/black ·:
Front speaker (right)
i Green ª, Green/black ·:
Rear speaker (left)
j Purple ª, Purple/black ·:
Rear speaker (right)
3