Kubota M6060 Operator's Manual page 61

Each push on the switch
changes the following
modes (1 thru 3).
1. Traveling speed
Hour meter mode
2. Traveling speed
1
PTO mode
3. Traveling speed
Fuel meter mode
Each push on the switch
changes the following
displays.
and Hour meter
Trip meter
and [PTO speed]
and Instantaneous fuel consum-
ption (Gallons (Liters) / hour
display)
Average fuel consumption
(Gallons (Liters) / hour
display)
Total fuel consumption
(Gallons (Liters) display)
OPERATING THE TRACTOR
A Traveling speed and total operating hours are
displayed.
A The hour meter indicates in 5 digits the hours the
tractor has been used; the last digit indicates 1/10 of
an hour.
A The total operating hours, counted from the previous
resetting, is displayed.
A Hold down the PTO / Hour meter select switch for 2
seconds or longer to reset the trip meter to [0. 0].
A Traveling speed and PTO speed are displayed.
A When the PTO clutch control switch is in "OFF"
position, "OFF" is displayed.
A See "PTO Speed Display Mode Switching" in "LCD
MONITOR" in "OPERATING THE TRACTOR"
section.
A The fuel consumption under the current operating
conditions is converted to an per-hour value and
displayed digitally.
A The amount of fuel consumed in operation from the
time of the last reset to the present is converted to an
per-hour value and displayed digitally.
A Hold down the PTO / Hour meter select switch for 2
seconds or longer to reset the average fuel
consumption display to [0. 0].
A The total amount of fuel consumed in operation from
the time of the last reset to the present is displayed
digitally. The maximum value which can be displayed
is 8000 gallons or 30000 liters.
A Hold down the PTO / Hour meter select switch for 2
seconds or longer to reset the total fuel consumption
display to [0. 0].
39