Kubota M6060 Operator's Manual page 43

3. Place the shift lever in "NEUTRAL"
position.
(1) Hydraulic-shuttle shift lever
(2) Main gear shift lever
(F) "FORWARD"
(N) "NEUTRAL POSITION"
(R) "REVERSE"
OPERATING THE ENGINE
4. Place the PTO clutch control switch in
"OFF" position and hydraulic control
levers in "LOWEST" position.
(1) PTO clutch control switch
(2) Position control lever
(3) Draft control lever
5. Set the throttle lever at the minimum
speed position.
(1) Hand throttle lever
(2) Foot throttle
21
"ON" "OFF"
(A) "DOWN"
"INCREASE"
"DECREASE"