Bosch Rexroth IndraDrive HCS02 Series Operating Instructions Manual page 53

DOK-INDRV*-HCS02******-IT01-EN-P
Rexroth IndraDrive Drive Controllers Power Sections HCS02
Recommendation for complex systems: Install drive components in one cabi‐
net and the control units in a second, separate cabinet.
Badly grounded control cabinet doors act as antennas. Therefore, connect
the control cabinet doors to the cabinet on top, in the middle and on the bot‐
tom via short equipment grounding conductors with a cross section of at least
6 mm 2 or, even better, via grounding straps with the same cross section.
Make sure connection points have good contact.
Bosch Rexroth AG
EMC Measures for Design and Installation
51/67