Table of Contents
Advertisement
Touchpad Remove
1
Using a cross-head screwdriver, remove the 5 screws on the touchpad.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully
to make sure that no unassembled screws are left inside the computer during
assembly.
2
Using the tweezers, remove the Kapton tape from the touchpad connector.
Using the opening tool, lift up the connector's lever and separate it using the
tweezers.
Keep the Kapton tape to reuse it for assembly.
Disassembly and Assembly
35
Advertisement
Table of Contents
