Fan Remove (Int Model) - Samsung NP950XDB Repair Manual

Fan Remove (INT Model)

1
Using the opening tool, open the lever of the fan connector and disconnect the cable
using tweezers.
The lever of the fan connector is located across from the cable insertion hole.
2
Using a cross-head screwdriver, separate the 3 screws on the fan and remove the fan.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully
to make sure that no unassembled screws are left inside the computer during
assembly.
After you finish disassembling, refer to
reassemble.
1
Fan Assembly (INT Model)
Disassembly and Assembly
2
for how to
24