Samsung NP950XDB Repair Manual page 29

3
Using a cross-head screwdriver, remove the 2 screws on the main board bracket and
separate it.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully
to make sure that no unassembled screws are left inside the computer during
assembly.
4
Using a cross-head screwdriver, remove the 5 screws on the main board and lift the
main board up to separate it.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully
to make sure that no unassembled screws are left inside the computer during
assembly.
After you finish disassembling, refer to
reassemble.
Disassembly and Assembly
Main Board Assembly for how to
29