Advertisement
8 Operating Procedures
Lower the parking stand to the ground by remov-
ing the tab lock pin from the stand index plate, then
swing the stand to the ground with the lever.
Lower And Pin Parking Stand
Reinstall the pin in the index plate through the hole
in the lever to hold the stand in place.
Disconnect the electrical connectors by pulling
them straight out from the receptacles. Do not
twist the connectors. Twisting will damage the
connector pins or the wiring harness.
Place dust caps on connectors to prevent con-
tamination.
Disconnect Plugs
Back inside the truck, return control of the head-
lights to the truck and switch power off on the
snowplow control box, then slowly back the truck
out from the plow.
DWG. NO. 7198
Turn Off Lights And Power
NOTE: The stop plate will automatically fall for-
ward as soon as the lift cylinder is fully extended
for raising the blade prior to transporting the plow.
If the snowplow won't be used for an extended pe-
riod of time, the prong weldment can be removed
from the truck by removing the hex bolts that fas-
ten it to the truck mount frame.
DWG. NO. 6698
DWG. NO. 4164
Advertisement
