AND PT Series Instruction Manual page 20

Displaying modes
The thermometer has three display modes.
Displaying mode
• Current temperature mode
Displays the current temperature.
• Max/Min temperature mode
Displays the latest maximum and
minimum temperatures that are
automatically stored in the thermometer.
• Auto power-off mode
Turns the power off automatically after six
or seven minutes of no operation.
Measuring the temperature
Follow the procedure below to measure the water temperature.
1. Remove the sheath protector from the
thermometer.
2. Press the ON/FAST button to turn the display on.
3. Insert the sensor sheath into the water.
4. The sampling interval is 10 seconds.
To speed this process, press and hold the
ON/FAST button for a sampling interval of every
2 seconds.
5. As the thermometer responds to the water
temperature, the displayed temperature changes,
stabilizes and then displays the water
temperature.
NOTE The thermometer detects the
temperature at the tip of the sensor
sheath. Do not expose parts of the
thermometer other than the sensor
sheath to the high or low temperature
of the test liquid.
Display example
Maximum temperature
Minimum temperature
18
ON / FAST AUTO-OFF
MAX / MIN
Water
Temperature
detection
part
Sensor sheath