Table of Contents
Advertisement
MODE BUTTON
The button located on the face of the instrument cluster is used to toggle through
available mode options in the following order:
• Odometer
• Trip Meter
• Tachometer
• Hour Meter
• Service Interval
• Diagnostic Display Mode
• Engine Error Codes (if activated)
When the vehicle is restarted, the rider information center will still be displaying
the last mode you were using, rather than starting over at the odometer.
DISPLAY UNITS
The instrument cluster can be customized to display either standard or metric
units of measurement.
To exit set-up mode at any time, wait 10 seconds. The display automatically
MEASUREMENT
Distance
Fuel
Temperature
Time
To change display units, do the following:
1. Turn key to OFF position.
2. PRESS and HOLD the Mode Button while turning key to the ON position.
3. The display will flash to the distance setting (mi / km), tap the Mode Button to
toggle between units.
4. PRESS and HOLD the Mode Button to save the setting and advance to the
next unit option.
5. Repeat procedure to change the subsequent unit settings.
exits and returns to the odometer display.
STANDARD
Miles
U.S. Gallons
Fahrenheit
12-Hour Clock
FEATURES AND CONTROLS
TIP
METRIC
Kilometers
Liters, Imperial Gallons
Celsius
24-Hour Clock
59
Advertisement
Table of Contents
