System - D-Link EAGLE PRO AI M15 Manual

Section 3 - Configuration
This page will allow you to back up or restore configuration settings or restore
settings from a previous backup. It also allows you to set up a reboot schedule
for automatic reboot. Go to Management > System Admin, then click
System to access this page.

System

Save Settings Click Save to download a backup of your current configuration settings
To Local Hard
to your local hard drive. This backup can later be used to restore your
Drive settings.
Load Settings Click Select File to browse your local hard drive for a configuration file
From Local Hard to restore your configuration settings from. Once selected, click Restore
Drive
to apply the settings from the configuration backup.
Restore To Click Restore to restore all configuration settings back to the settings
Factory Default that were in effect at the time the device was shipped from the factory.
Settings
Any settings that have not been saved will be lost, including any rules
that you have created.
Auto Reboot Configuration
Reboot the Click the Reboot to reboot the device immediately.
Device
Auto Reboot
Use the drop-down menu to select a schedule for the device to
reboot automatically. The schedule may be set to Never, Daily, or
Weekly. Depending on your selection, set a time and week day for
the auto reboot schedule.
Click Save when you are done.
D-Link M15 User Manual
System
75