D-Link EAGLE PRO AI M15 Manual page 32

Section 3 - Configuration
DS-Lite allows local IPv4 packets to travel through an IPv6 network. Configure
the following parameters for Internet connectivity using DS-Lite:
Advanced Settings
DS-Lite Select DS-Lite DHCPv6 Option to let the device allocate the AFTR
Configuration
IPv6 (Address Family Transition Router) address automatically. Select
Manual Configuration to enter the AFTR IPv6 address manually.
If you select DS-Lite DHCPv6 Option as the DS-Lite Configuration:
B4 IPv4 Address
Enter the B4 (Basic Bridging Broadband) IPv4 address that will be
encapsulated into IPv6 packets to transmit over an IPv6 network.
WAN IPv6 Once connected, the WAN IPv6 address will be displayed here.
Address
IPv6 WAN
Once connected, the IPv6 WAN default gateway address will be
Default Gateway
displayed here.
If you select Manual Configuration as the DS-Lite Configuration:
AFTR IPv6 Enter the Address Family Transition Router (AFTR) IPv6 address.
Address
This is where an IPv6 packet will be decapsulated.
B4 IPv4 Address
Enter the B4 IPv4 address.
WAN IPv6
Once connected, the WAN IPv6 address will be displayed here.
Address
IPv6 WAN
Once connected, the IPv6 WAN default gateway address will be
Default Gateway
displayed here.
D-Link M15 User Manual
DS-Lite
26