Advertisement
Power on: Hold button A for about 3 seconds while the device is off.
Power off: Hold button A for about 5 seconds while the device is on.
Reset: Hold button A for about 10 seconds.
Turn off/on the display: While the device powers on and not on the menu page, short press button A.
Activate menu: While the device powers on and not on the menu page, hold button A for about 2 seconds.
Exit menu: Hold button A for about 2 seconds on the menu page.
Switch submenus: Short press button A/B on the menu page.
Select options under a submenu: Short press button C/D on the menu page.
(not on the menu page)
(not on the menu page)
Activate Siri/voice assistant: Double press button B.
Play/Pause/Answer a phone call/Hang up/Cancel a phone call: short press button B.
Reject a phone call: Hold button B for about 2 seconds when there is an incoming call.
Volume up/down: Short press button C/D.
Switch tracks: Hold button C/D for about 2 seconds to switch to the previous/next track.
Clear pairing: Hold button C and D at the same time for about 5 seconds when the device is on.
After a successful pairing with device1, hold button B for about 5 seconds to enter the pairing mode again. Search for "BTR5" on device 2 and pair it with the BTR5. Back to device 1, select "FiiO BTR5" in the Bluetooth device list and reconnect them. You could also restart the BTR5 after a successful pairing with device 2, so the BTR5 can be connected to two Bluetooth devices simultaneously.
Note: The BTR5 supports a simultaneous connection to at most two devices.
(not on the menu page)
When the BTR5 powers on and the Android device is unlocked with NFC enabled, tap the detecting area of the BTR5 to start the paring.
Connect the BTR5 to a USB power supply when it is on, or turn it on after inserting a USB power supply. The display will pop up a prompt of whether to disable the charging function, showing as "CHARGE OFF?" . At this time, press any button to disable the charging function. If there is no operation in 10 seconds, the charging function will be enabled as default. This function is very convenient when the BTR5 is working as a decoder for mobile phones.
Note: If the prompt page is closed after time is up, you can still choose to enable or disable the charging function on the menu.
Notes:
FILTER | Hybrid fast roll-off; Fast roll-off |
EQ | OFF, Jazz, Pop... |
CHARGE | On: Charge the BTR5 when connecting to USB; OFF: No charging when connecting to USB |
CAR MODE | On: The BTR5 will power on automatically after the vehicle engine starts and power off after the engine shuts off |
DIMMER | Adjust screen brightness level: 1~6 |
U-AUDIO | USB1.0: Driverless under USB 1.0 USB2.0: High bit rate transferring under USB2.0 |
GAIN | 'L' means power saving with lower power output. 'H' means increased power consumption with higher power output. |
When using USB Audio 2.0 mode for Windows computers, please go to FiiO's official website to download and install the USB DAC driver. (For MAC computers, there is no need to install the driver, but it requires selecting the BTR5 as the default device for audio output). FiiO Support website: https://www.fiio.com/Driver_Download
When using USB Audio 1.0 mode, no driver is required. Just select the BTR5as the default audio output device after connecting it to the computer. It is recommended to adjust the volume of the computer to max level, and control the output volume on the BTR5.
Notes:
BTR5*1 | Type C USB cable *1 | Removable rear clip*1 |
Quick start guide *1 | Warranty card *1 |
To learn more about the product, please visit our website: www.fiio.com.
Hold the BTR5 with yourself hand and keep its top or rear end in the middle of your left palm. Put your left index finger and thumb on the BTR5 at position (as shown in the image). Then use your right thumb and index finger to pull the clip at position away from the BTR5. When you see a gap appears between the BTR5 and the clip at position , use your right index finger to take the clip off by position .
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download FiiO BTR5 - Bluetooth Headphone Amplifier Quick Start Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BTR5 that isn't answered in the manual? Leave your question here.