Page 2
English Bluetooth Headphone Amplifier Buttons and Ports Labeled 3.5mm headphone port 2.5mm headphone port Microphone Power on/off,Reset, Activate menu, Exit menu, Switch submenus Reconnect/Play/Pause/Answer call/hang up/Cancel a call/Force a pairing, Activate voice assistant, Switch submenus Vol. up/Previous track, Select options under a submenu Vol down/Next track,Select options under a submenu Type C USB charging/decoding port...
Page 3
Turn off/on the display:While the device powers on and not on the menu page, short press button A. Activate menu: While the device powers on and not on the menu page,hold button A for about 2 seconds. Exit menu: Hold button A for about 2 seconds on the menu page. Switch submenus:Short press button A/Bon the menu page.
Page 4
After a successful pairing with device1, hold button B for about 5 seconds to enter the pairing mode again. Search for "BTR5" on device 2 and pair it with the BTR5. Back to device 1, select "FiiO BTR5" in the Bluetooth device list and reconnect them. You could also restart the BTR5 after a successful pairing with device2, so the BTR5 can be connected to two Bluetooth devices simultaneously.
Connect the BTR5 to a USB power supply when it is on, or turn it on after inserting a USB power supply. The display will pop up a prompt of whether to disable the charging function, showing as "CHARGE OFF?"...
Page 6
When using USB Audio 2.0 mode for Windows computers, please go to FiiO's official website to download and install the USB DAC driver. (For MAC computers, there is no need to install the driver, but it requires selecting the BTR5 as the default device for audio output). FiiO Support website: https://www.fiio.com/Driver_Download When using USB Audio 1.0 mode, no driver is required.
MQA Core Decoder. ★If the BTR5 is connected through both Bluetooth and USB DAC, the USB DAC will default to be prior to the Bluetooth. You can also switch to Bluetooth first in the FiiO Music APP for your preference.
④ ① Hold the BTR5 with yourself hand and keep its top or rear end in the middle of your left palm. Put your left index finger and thumb on the BTR5atposition①②(as shown in the image). Then use your right thumb and index finger to pull the clip at position③...