Battery And Charger - Populo CURVE User Manual

BATTERY AND CHARGER

Charging Instructions
Note: Charge the eBike before using it.
Make sure the eBike is turn o . Open the cap, plug the charger into the charging port, then plug
the other end into an AC wall outlet.
The charging adapter' s light will turn red during charging then turn green once the battery is fully
charged. Disconnect all cables once charging is finished.
For your convenience, the battery can also be charged while detached it from Populo Curve eBike.
1
Note:
Fully charge the battery before first use.
Recommend charging the battery o the bike indoors, in moderate temperature conditions.
Perform periodic visual inspection of the battery ports and charging cables.
Keep your charging environment clean and dry at all times.
If the charging port is damp or has any liquid on it, do not charge your eBike.
In order for the battery to operate at maximum e ciency, avoid charging your eBike in extremely hot or
extremely cold environments.
Do not under any circumstances, use the bike while it is charging or connected to charger.
The charging time is approx. 4 hours, over charging may a ect battery life or performance. If the
charging adapter' s light does not turn on, it may not be fully connected, check that it is securely
connected to the wall and to the eBike.
Always use the charger provided with your Populo Curve eBike ONLY, if you have lost or misplaced
your charger, contact Populo customer support to obtain a replacement.
After many charging and discharge cycles, runtime and range will be reduced.
Battery USB output Port
The battery is designed with a standard 5VDC 1 Amp USB output port for charging of other devices such
as mobile phone, pad etc.
2
3
08