RCA EZDVD1 Quick Start Manual

EZDVD1_QSG 8/9/07 10:15 AM Page 2
Congratulations on purchasing your new RCA Memory Maker.
Please read these instructions for quick tips on using the unit.
Recording from Small Wonder camcorder
1. Connect the power cord at the back of the
unit and install 2 AAA batteries in the
remote control.
DC 12V
2. Press ON/STANDBY to turn on the unit.
QuickStartGuide
EZDVD1/EZDVD2
www.mysmallwonder.com
3. Press to open the disc tray.
4. Load a recordable disc on the disc tray.
Press to close the disc tray. Refer to
page 9 of the user manual for recordable
discs.
Tocom: 5645 6010 (EN/E)
5. Put the Small Wonder camcorder upside
down and connect it to the connector on
the top of the unit.
Right view
Remove the
protective cover
before first use
This indicator
blinks during
communication
and lights when
the camcorder
docked
Top view
• Once connected, the below message will
show on the LCD screen of the camcorder:
REC: Copy all
PLAY: Play videos
6. Press REC twice to start recording all
videos on the camcorder. The indicator
around the REC button lights during
recording.
• Alternatively, press to start playback of
the videos. Repeat the step above to
record only the video you are currently
viewing.
7. Press to stop recording. Otherwise,
recording will stop automatically when
finished. Recording is fully stopped when
the indicator around the REC button is off.
8. Press to unload the disc tray.
• You will be asked to finalize the disc with
other DVD players. If you want to play the
disc on other DVD players, press .
Otherwise, press to unload the disc.
Read the following pages in the user
manual for more information on:
Connecting to a TV Page 6
Other connection options Page 7
Record from the SD/MMC card Page 11
(if installed in the Small
Wonder camcorder)
Record selected videos from Page 11-12
the Small Wonder camcorder
Playback of various types of Page 13-16
disc
Player menus
Page 17-18