※ presetting 8960
(Rx setting)
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
1. Active Cell
: select GSM or GPRS
2. Connetion Type
: select Auto(GSM), BLER(GPRS)
3. BCH Parameter
: select measuring band (DCS or EGSM)
4. Cell power
: -60dBm
(Tx setting)
※ After setting 8960 ( EGSM / DCS )
1. After setting, prepare the call setup Display
2. Using an Originate Call, make a call.
3. Confirm the display "connected"
4. start the measuring
8-23
Level 3 Repair
kim.sa@samsung.com