FSI XM311K User Manual

Hide thumbs

page of 20

/ 20
Bookmarks

Quick Links

Download this manual

Monitor User Manual

Updated 12.16.2021

XM Series

XM311K

This manual is based on firmware V2.1.20.

Some selections may be unavailable or not work correctly if

using a different firmware build.

Flanders Scientific, Inc.

6215 Shiloh Crossing

Suite G

Alpharetta, GA. 30005

Phone: +1.678.835.4934

Fax: +1.678.804.1882

E-Mail:

Support@FlandersScientific.com

www.FlandersScientific.com

Need help?

Do you have a question about the XM311K and is the answer not in the manual?

Questions and answers

Summary of Contents for FSI XM311K

Page 1 Monitor User Manual Updated 12.16.2021 XM Series XM311K This manual is based on firmware V2.1.20. Some selections may be unavailable or not work correctly if using a different firmware build. Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA. 30005 Phone: +1.678.835.4934...
Page 2 Contents TOPIC PAGE(S) Safety Precautions 3 - 5 Parts & Their Functions 6 - 7 Menu 8 - 17 Dimensional Drawing Return to Table of Contents © 2021 Flanders Scientific, Inc.
Page 3 Safety Precautions CAUTION DO NOT LAY FLAT. DO NOT ROTATE OR TURN UPSIDE DOWN. Monitor must be transported, stored, and operated upright at all times. Please ensure monitor is kept clean and free of dust. Failure to follow these guidelines may lead to dust inflow or panel damage. Panel bending, bruising, and dust inflow are not warrantable conditions.
Page 4 Safety Precautions • When mounting the product to a wall, ceiling, or within a rack/enclosure, be sure to install the product according to the instructions of both the mount and monitor manufacturer. • Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other unsafe conditions.
Page 5 Safety Precautions • For proper chassis maintenance please follow the guidelines below to avoid any potential damage: • Do not wipe the chassis with solvents such as alcohol, paint thinner, or benzene. • Do not expose the cabinet to any volatile substances. •...
Page 6 Parts & Their Functions Keyboard • SDI 1: Used to select SDI Input 1 as the active Input. • SDI 2: Used to select SDI Input 2 as the active Input. • SDI 3: Used to select SDI Input 3 as the active Input. •...
Page 7 Parts & Their Functions Back Panel • SDI In: 4 Multi-Format 12G/6G/3G/HD-SDI Inputs. • SDI Out: 4 Looped 12G/6G/3G/HD-SDI Outputs. • MON Out: Processed output. Follows Mode Selection • DP In: Display Port Input. • Audio In/Out: Analog Stereo Mini-phono Au- dio Input &...
Page 8 Menu Navigating the Menu Pressing the MENU button on the monitor’s keypad will call up the on screen menu. To navigate use the UP and DOWN buttons and press the ENTER button to select the highlighted sub menu. Navigate the sub menu in the same way by using the UP and DOWN buttons to highlight a particular function and press ENTER to change that function’s settings.
Page 9 Menu - Function Menu Function Menu Function Luminance Scope Scope Vector Scope Video Pixel Mapping Color LUM Coloring System Area Marker Safety Marker Center Marker Load Profile 0 Load Profile 1 Load Profile 2 Load Profile 3 Load Profile 4 Load Profile 5 Load Profile Saved profile configurations can now be loaded via function button.
Page 10 Menu - Scope Menu Scope Menu Function Luminance Scope Lum Position Bottom Right Video Lum Style Color Vector System Vec Position Bottom Right Lum Coloring Lum & Vec Position Use Lum & Vec Position to select in what area of the screen you would like your Scopes to be displayed. Lum Style Select IRE or HDR (PQ) Waveform.
Page 11 Menu - Video Menu Video Menu Function Input SDI 1 Scope Mode AUTO Video SDI Format AUTO Color Pixel Mapping System Deinterlace Mode Mode 2 SDI Format Select the correct incoming signal format. SDI Format selection overrides payload ID if not set to AUTO. Mode The mode selection allows you to set the SDI input configuration as well as the processed monitor output configuration.
Page 12 Menu - Video Menu Video Menu Function Input SDI 1 Scope Mode AUTO Video SDI Format AUTO Color Pixel Mapping System Deinterlace Mode Mode 2 Pixel Mapping Pixel Mapping toggles between various available pixel mapping options including: With Pixel Mapping set to OFF the incoming source is scaled to fill as much of the screen as possible while preserving aspect ratio.
Page 14 Gamma 2.4 Luminance Mode Luminance Custom ColorSystem Default - Default selection where XM311K factory calibration LUTs are stored. GaiaColor - Reserved for future use. LightSpace / CalMAN - Open slots for use with LightSpace and CalMAN LUT Mode Does not apply to GaiaColor Color System.
Page 15 Menu - Color Menu Color Menu Function ColorSystem User Scope LUT Mode Normal Video Range SMPTE Full 4-1019 Color Gamut BT.709 System Temperature Default EOTF Gamma 2.4 Luminance Mode Luminance Custom Gamut Select from available options to instantly change the active color space. Luminance Mode Select from 100, 200, 400, 800, 1000 or Custom.
Page 16 Gamma 2.4 Luminance Mode Luminance Custom Recommended XM311K Configurations Using Firmware 2.1.2 Basic settings for the two most commonly used configurations on the XM311K are provided below. For P3 D65 PQ HDR Color System: Default Gamut: P3-ST2084 Luminance Mode: 1000 *Please note that in the DEFAULT Color System if factory LUTs have not been overridden the gamut option DCI P3 will target a DCI white balance of x=0.314, y=0.351 while the P3-ST2084 option will...
Page 17 Normal 192.168.1.1 Apply Settings Update Firmware When left to Allow (default) allows firmware to be remotely updated using the FSI IP Remote Utility. When set to Block prevents firmware from being remotely updated. Current IP Shows monitor’s current IP address.
Page 18 Menu - System Menu System Menu Function Update Firmware Allow Scope Current IP 192.168.1.100 Video Version 2.1.20 Color Serial Number XM310A0000 System Payload ID 0000 Profile Load Profile Save Set Static IP 192.168.1.100 192.168.1.100 IP Reset DHCP 255.255.255.0 Fan Speed Normal 192.168.1.1 Apply Settings...
Page 19 Menu - OSD Menu OSD Menu Function Time Code Scope Status Position Top Left Video Status Set Color Menu Position Top Left System Menu Set Area Marker Safety Marker Center Marker Time Code Allows you to select whether to display Time Code on screen pulled from an SDI signal. Reserved for future use, inactive in 2.1.2 Menu &...

This manual is also suitable for:

Xm series