FSI LM-0750W User Manual
  1. Manuals
  2. Brands
  3. FSI Manuals
  4. Monitor
  5. LM-0750W
  6. User manual

FSI LM-0750W User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

This manual is based on firmware version 9.50-1866. If you
have an older or newer firmware version some of the functions
mentioned in may not be present or operate differently.
Flanders Scientific, Inc.
470 Satellite Blvd. NE
Suite P
Suwanee, GA 30024
Phone: +1.678.835.4934
Fax: +1.678.804.1882
E-Mail:
Support@FlandersScientific.com
www.FlandersScientific.com
LCD Monitor User Manual
Updated 03.26.2013
LM-0750W
LM-0950W
LM-1760W
LM-1770W
CM-170W
LM-2140W
LM-2340W
LM-2340TD
LM-2461W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-0750W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FSI LM-0750W

Summary of Contents for FSI LM-0750W

  • Page 1 LCD Monitor User Manual Updated 03.26.2013 LM-0750W LM-0950W LM-1760W LM-1770W CM-170W LM-2140W LM-2340W LM-2340TD LM-2461W This manual is based on firmware version 9.50-1866. If you have an older or newer firmware version some of the functions mentioned in may not be present or operate differently.

  • Page 2: Table Of Contents

    Contents TOPIC PAGE(S) Safety Precautions Parts & Their Functions Menu Navigation / System Status Function Menu 8-16 Marker Menu Video Menu 18-19 Scopes & VU Meters Menu 20-22 System Menu 23-25 Alarm Menu 26-28 OSD Menu GPI Menu Audio Menu Display Alignment Menu Display Alignment Menu: 33-36...

  • Page 3: Safety Precautions

    Safety Precautions • All operating instructions must be read and understood before the product is operated. • These safety and operating instructions must be kept in a safe place for future reference. • All warnings on the product and in the instructions must be observed closely. •...
  • Page 4 Safety Precautions • For proper chassis maintenance please follow the guidelines below to avoid any potential damage: • Do not wipe the chassis with solvents such as alcohol, paint thinner, or benzene. • Do not expose the cabinet to any volatile substances. •...

  • Page 5: Parts & Their Functions

    Parts & Their Functions Phase / H Pos Video Chroma / V Pos YPbPr Bright / F.D SDI 2 Contrast / F Stop SDI 1 Volume / Reset Menu Enter Power Down • SDI 1: Used to select SDI Input 1 as the active Input. •...
  • Page 6 Parts & Their Functions RJ-485 RS-232 DVI-I Video DC Power 100mm VESA AC Power Component • LAN: Inactive—Factory Use Only. • GPI: General Purpose Interface for Contact Closure Remote Control. Remote Control Functions can be assigned from Monitor Main Menu. •...

  • Page 7: Menu Navigation / System Status

    Menu Navigation / System Status Main Menu Pressing the Menu Button on the Monitor’s Keypad will call up the Main Menu, as shown below: Main Menu Function Function Function 1 Scopes & VU-Meters 1 Scopes & VU-Meters Function 2 Scopes & VU-Meters 2 Video Function 3 Scopes &...

  • Page 8: Function Menu

    Function Menu Main Menu Function NOTE: Many features (Waveform, Function Function 1 Scopes & VU-Meters 1 Vector Scope, Audio Level Meters, Scopes & VU-Meters Function 2 Scopes & VU-Meters 2 etc.) require a function key in order to operate. Some menus (such as Video Function 3 Scopes &...
  • Page 9 Function Menu Details on Overscan Function With the overscan function Off all active lines of video can be displayed on screen. With overscan On a small percentage of the outermost active video will not be displayed. Additionally, the monitor can scale the overscanned video full screen or ‘blackout’...
  • Page 10 Function Menu Sub Window The Sub Window function enables a Picture by Picture mode. After assigning the Sub Window function to a function key the first key press of that function key will result in a picture by picture display of your active input. Once sub window mode is active you can press down on the H POS rotary knob to freeze the image on the right while the image on the left will continue to show your live source.
  • Page 11 Function Menu SD Aspect Ratio Toggles between 4:3 and Anamorphic display of Standard Definition source. This function should be set to match the SD source being viewed. The default setting is 4:3. If used in conjunction with 1:1 pixel mapping this function can also activate a PAL SD FHA viewing mode.
  • Page 12 Function Menu Measurement This function allows you to get precise real time YRGB measurements of any point or area within your incoming signal. To toggle this feature on/off simply press the function key you have assigned to the Measurement function to display a movable crosshair onscreen.
  • Page 13 Function Menu Focus Assist To activate this function simply set it to a function key. Pressing the assigned function key will turn the focus assist feature on and pressing it again will turn it off. The focus assist feature is comprised of two main parts: a numerical focus meter and a graphical focus highlight.
  • Page 14 Function Menu DSLR Zoom (continued) DSLR in 1080i Preview with DSLR Zoom feature Off DSLR in 1080i Preview with DSLR Zoom Feature On DSLR in 480p Record Mode with DSLR Zoom feature off DSLR in 480p Record Mode with DSLR Zoom feature On Safety Broadcast Safety Broadcast is a special monitoring mode designed for Control Room and QC station environments.
  • Page 15 Function Menu AFD (Active Format Description) Activating this function will enable an Active Format Description AFD: 0x0d reader on the monitor that will provide both a text readout of AFD code frame 16:9 data and display corresponding markers onscreen indicating active image 4:3 the portions of the image described by the AFD code.
  • Page 16 Function Menu Invert Screen (LM-0950W Only) Allows the image to be flipped onscreen in real-time. This function only works on the LM-0950W. CX Scale This scaling mode was designed specifically to allow the scaled down and top centered ’gate check’ output from Codex™ ARRIRAW Recorders to be scaled full screen.

  • Page 17: Marker Menu

    Marker Menu Main Menu Marker NOTE: The Marker Menu only sets Function Marker Select Profile 1 your marker preferences. To toggle the onscreen display of your configured Scopes & VU-Meters Area Marker marker assign the Marker function to one Video Safety Marker of the function keys.

  • Page 18: Video Menu

    Video Menu Main Menu Video Function Gamma Select Gamma 2.2 Scopes & VU-Meters Log Mode Video Color Temperature 6500K Audio Sharpness Level Default Marker SD Enhancement System Anamorphic De-Squeeze Alarm Signal Mode Auto Processing Normal Mode Composite Setup 7.5 IRE Display Alignment Component Setup YPbPr SMPTE/N10...
  • Page 19 SDI Format (ONLY APPLIES TO 3Gbps SDI ENABLED MONITORS) FSI Monitors are capable of detecting the payload ID contained in an SDI signal and adjusting the format accordingly. However, some sources or upstream equipment may not generate or pass this payload ID. For sources lacking a proper Payload ID you may override the SDI Format auto detect function and manually choose between the following formats: 4:2:2 YCbCr, 4:4:4 YCbCr, 4:4:4 RGB, 4:4:4 YCbCr 12bit, 4:4:4 RGB 12 bit, 4:4:4 XYZ 12bit, or 4:2:2 YCbCr 12 bit.

  • Page 20: Scopes & Vu Meters Menu

    Scopes & VU Meters Menu Main Menu Scopes & VU Meters NOTE: The Scope & VU Meters Function Scopes & VU Meters Profile 1 Menu only sets your Waveform, Scopes & VU-Meters Window 1 Luminance Vector, & Audio Level Meter Video Window 2 Vector...
  • Page 21 OSC Mode (LM-0750W Only) Activating this option, only available on the LM-0750W, will generate a quad viewing mode with 2 Scopes of your choice (Window 1 and Window 2) as well an Audio Phase Meter and 2 Channel Audio Level Meters in addition to a preview window showing the active signal whenever the corresponding Scopes and VU Meters profile is selected.
  • Page 22 Scopes & VU Meters Luminance Vector Scope RGB Parade GBR Parade Color Histogram YCbCr RGB Histogram Column (YRGB Peak) Histogram YCbCr Overlay RGB Overlay Audio Phase Meter Audio Level Meters Return to Table of Contents © 2013 Flanders Scientific, Inc.

  • Page 23: System Menu

    DVI Selection / DVI Pixel Format FSI Monitors are equipped with a DVI-I Input, which supports both DVI Digital and DVI Analog sources. To select between DVI-D (Digital) and DVI-A (Analog) simply toggle this control accordingly. Use DVI Pixel format to select between Full RGB (0-255), Limited RGB (16-235), or YCbCr modes.
  • Page 24 Line by Line from the 3G Level B Menu selection, which will instruct the monitor to interleave the sources and display them onscreen for 3D viewing through passive 3D glasses. In addition to this Line by Line mode all FSI monitors with 3Gbps SDI...
  • Page 25 System Menu Main Menu System Function DVI Selection DVI-D Scopes & VU-Meters DVI Pixel Format Full RGB Video Component Input COMPONENT Audio Component Pixel Format YPbPr Marker 3G Level B Stream 1 System SDI Hue Adjustment Alarm Back Light Back Light Interval LED Light Display Alignment Language...

  • Page 26: Alarm Menu

    Alarm Menu Main Menu Alarm NOTE: Onscreen Alarms are Function Alarm processing power intensive. Scopes & VU-Meters Visual Alarm When active the monitor may Video Remote Alarm Monitoring respond more slowly to user input via buttons/remote control Audio IRE Trigger Level 100 IRE if a large number of successive Marker...
  • Page 27 Parity None Remote Alarm Monitoring When set to ON allows for remote alarm monitoring via FSI’s remote alarm monitoring software. IRE Trigger Level Sets the luminance threshold at which IRE alarms will be triggered, adjustable from 90 to 109 IRE Audio Trigger Time Sets the amount of time with mute audio that should elapse before the mute audio alarm is triggered.
  • Page 28 Alarm Menu Main Menu Alarm Function Alarm Scopes & VU-Meters Visual Alarm Video Remote Alarm Monitoring Audio IRE Trigger Level 100 IRE Marker Audio Trigger Time System UMD Display Alarm UMD Color White UMD Position Bottom Audio Meter Vertical Display Alignment Select Alarm Area System Status RS422 Address...

  • Page 29: Osd Menu

    OSD Menu Main Menu Function Status Display 5 Sec. Scopes & VU-Meters Menu Pos. Top Right Video Status Pos. Top Left Audio Rotary Pos. Bottom Marker Source ID System Source ID Position Bottom Alarm Source ID Character CAM1 Time Code VITC1 Time Code Size Small...

  • Page 30: Gpi Menu

    GPI in their respective menus (i.e. Marker Menu) in order to function properly. If using FSI’s GPI Keypad Lock to lockout the monitor’s keypad the Keyboard Locking function must be set to GPI 1. Return to Table of Contents...

  • Page 31: Audio Menu

    Audio Menu Main Menu Audio NOTE: All FSI Monitors can Function SDI 1 Audio Digital CH1&2 monitor embedded audio in Scopes & VU-Meters SDI 2 Audio Digital CH1&2 SD-SDI, HD-SDI, and 3G-SDI signals. However, 3GSDI audio Video Component Audio Analog...

  • Page 32: Display Alignment Menu

    Support Start Display Alignment FSI sells/rents an optional automatic alignment kit composed of our passive color analyzer adapter and a compatible color analyzer. If you have this kit follow these simple steps to realign your monitor to factory specifications: 1. Place your color analyzer in front of the display.

  • Page 33: Custom Calibration Luts

    Display Alignment Menu Custom Calibration LUTs Starting with Firmware 9.49, FSI models equipped with the Color Fidelity Engine are capable of loading custom calibration 3D LUTs. This advanced feature requires use of color management software (such as Light Illusion’s LightSpace, which is currently supported) and a professional grade probe.
  • Page 34 After the monitor has loaded the profile and restarted, turn the monitor off by using the Power button on the keypad. Connect the FSI update cable that came with your monitor (USB to RJ45) to the GPI port on your monitor.
  • Page 35 Note: If you notice image solarization, the CFE update did not complete correctly. It may be necessary to repeat this process. When using LightSpace to generate custom user LUTs for FSI monitors, the colorspace image name typed into the Convert Color Space Window MUST the monitor model name. Valid Model Names: CM170, LM-2461W.
  • Page 36 Display Alignment Menu Now that your custom LUT has been saved, turn the monitor off and once again place the monitor in update mode by entering the following key combination on the monitor’s keypad: MENU, ENTER, UP, DOWN, MENU, ENTER, UP, DOWN, MENU, DOWN, POWER.

  • Page 37: Monitor Specifications

    Monitor Specifications Model LM-0750W LM-0950W CM-170W LM-2140W LM-2340W LM-2340TD LM-2461W Panel Specifications Screen Size 7” 8.9” 17.1” 21.5” 23” 23” 24” Resolution 800x480 1024x600 1920x1200 1920x1080 1920x1080 1920x1080 1920x1200 Aspect Ratio 15:9 17:10 16:10 16:9 16:9 16:9 16:10 Bit Depth (Colors) 8 (16.7M)
  • Page 38 Monitor Specifications Model LM-0750W LM-0950W CM-170W LM-2140W LM-2340W LM-2340TD LM-2461W Features Rack Mount Kit Single or Dual Single or Dual Standard Optional Optional Optional Optional Desktop Stand Optional Standard Standard Standard Standard Standard External Mounting 1/4” x 20 Top & Bot 1/4”...

  • Page 39: Monitor Diagram: Lm-0750

    LM-0750W Diagram Return to Table of Contents © 2013 Flanders Scientific, Inc.

  • Page 40: Monitor Diagram: Lm-0950

    LM-0950W Diagram Return to Table of Contents © 2013 Flanders Scientific, Inc.

  • Page 41: Monitor Diagram: Cm-170W

    CM-170W Diagram Return to Table of Contents © 2013 Flanders Scientific, Inc.

  • Page 42: Monitor Diagram: Lm-2140W

    LM-2140W Diagram Return to Table of Contents © 2013 Flanders Scientific, Inc.

  • Page 43: Monitor Diagram: Lm-2340W / Lm-2340Td

    LM-2340W / LM-2340TD Diagram Return to Table of Contents © 2013 Flanders Scientific, Inc.

  • Page 44: Monitor Diagram: Lm-2461W

    LM-2461W Diagram Return to Table of Contents © 2013 Flanders Scientific, Inc.

This manual is also suitable for:

Lm-0950wLm-1760wLm-1770wCm-170wLm-2140wLm-2340w ... Show all

Table of Contents