RCA VRD120 User Manual page 77

Appendix: reference
Clock shows incorrect time or date
• Power interruption.
• Check to make sure the clock is set accurately (check
AM/PM and date).
• Check Daylight-Saving setting. Clock may have adjusted
for daylight-saving.
• Check to make sure daylight-saving feature is set
correctly.
VCR makes noise when stopped
• VCR is removing tape from heads. This is normal. The
head cylinder inside the VCR will continue to rotate for
a few minutes after you put the VCR in the stop mode.
Will not Auto Channel Search active
channels correctly
• Check to make sure the antenna connections are secure
and correct.
• Check to make sure the Signal Type: CABLE/ANTENNA
feature is set correctly.
• If Detect Automatically was selected for the Signal Type
in the AUTO CHANNEL SEARCH menu, try using either
CABLE TV or ANTENNA instead.
• May not be necessary if using a cable box for all
channels. Contact your local cable company for more
information.
Tape plays back in slow motion
• Press PLAY to return to normal playback.
Cannot select channels over 69
• Cable channels over 69 can only be selected if Signal
Type: CABLE/ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not
start to play automatically
• Check to make sure the AUTO PLAY ON/OFF feature is
set to ON.
Timer indicator flashes
• The clock is not set.
• Check to make sure there is a cassette in the VCR when
a timer recording is set.
Time counter disappears during searching
• This is normal.
75