Download Print this page

Sharper Image UHT1-SI Owner's Manual page 6

Ultrasonic humidifier

Advertisement

your product.
- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage, is
compatible with your outlet's power supply.
- Never use the cord as a handle or otherwise yank, strain or stretch the
power cord.
- While the product is plugged in, do not insert or allow foreign objects
to enter any input or output opening as this may cause risk of electric
shock or fire, or damage the product.
- A loose fit between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the product
in this outlet. Contact a qualified electrician to replace loose or worn
outlets.
- This appliance has a polarized plug (one blade is wider than the
other.) To reduce the risk of electrical shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
- The product may be hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. Always allow appliance to cool at least 30
minutes before moving, refilling or emptying it. Empty all water and dry
unit before storing.
- Before filling with water, moving, repositioning, servicing, cleaning and
when not in use, use the product controls to turn off the power and
then unplug. To disconnect from outlet, grasp and pull only the plug.
Also, power off and unplug if the product will be left unattended for an
extended period of time or during electrical storms.
- Electric shock can occur when liquid comes in contact with electricity.
Be careful when removing the water tank and refilling to avoid electric
shock.
- Turn the humidifier off if the relative humidity exceeds 60%. Humidity
levels above 60% may allow moisture to build up indoors and
6
English

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the UHT1-SI and is the answer not in the manual?

Questions and answers

Mary Maddox
February 6, 2025

How do you fill the tank without the water running Out with the sharper image ultrasonic humififier

User image 67a54c9d7ec4d
1 comments:
Mr. Anderson
February 10, 2025

To fill the tank of the Sharper Image UHT1-SI ultrasonic humidifier without water running out, follow these steps:

1. Unplug the humidifier and place it on a level surface.
2. Grasp the integrated water tank handle and pull the tank toward you to remove it.
3. Turn the water tank upside down.
4. Remove the cap by turning it counterclockwise.
5. Fill the tank with cool tap water (distilled water is recommended for hard water).
6. Replace the cap by turning it clockwise to close securely.
7. Ensure the cap is tightly sealed before turning the tank upright to prevent leaks.

This method prevents spills and ensures proper operation.

This answer is automatically generated

Save PDF