- The appliance, power supply, power cord and plug cannot come into
contact with water. Do not use this product on wet surfaces. Do not use
this product in a bathtub or shower or position product where it may
fall into a bathtub, laundry, swimming pool or other water container.
Do not use this product outdoors or expose it to weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over. The cord should not hang over edges of counters
or be placed where it can be crimped or closed in doors. Place
appliance near an easily accessible outlet so the product can be
unplugged quickly during an emergency.
SAFE USE WARNING—To reduce risk of fire, electrical shock and injury to
persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, fire and electric
shock, do not operate with a solid state speed device, such as a
dimmer control switch.
- Do not operate unit if the unit has been dropped or damaged. Do
not use this product if it has a damaged power cord or plug. To avoid
risk of electrical shock, do not attempt to repair or replace parts.
Only original replacement parts may be used. If the power cord is
damaged, it must be replaced by the manufacturer, its service agent,
or similarly qualified persons in order to avoid a hazard. Contact
(833.800.8669) or (help@sihomecomfort.com) for further instructions
about replacement and repair.
- Risk of fire. Your appliance may be equipped with a detachable power
supply. The detachable external power supply and cord have no user
replaceable parts. If the power supply or cord is damaged, it must
be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard. Use only the detachable
[GQ24-240100-AU] external power supply and cord that comes with
English
5
Need help?
Do you have a question about the UHT1-SI and is the answer not in the manual?
Questions and answers
How do you fill the tank without the water running Out with the sharper image ultrasonic humififier
To fill the tank of the Sharper Image UHT1-SI ultrasonic humidifier without water running out, follow these steps:
1. Unplug the humidifier and place it on a level surface.
2. Grasp the integrated water tank handle and pull the tank toward you to remove it.
3. Turn the water tank upside down.
4. Remove the cap by turning it counterclockwise.
5. Fill the tank with cool tap water (distilled water is recommended for hard water).
6. Replace the cap by turning it clockwise to close securely.
7. Ensure the cap is tightly sealed before turning the tank upright to prevent leaks.
This method prevents spills and ensures proper operation.
This answer is automatically generated