Advertisement
HOW TO USE
HIGH MIST SETTING
Operation for fast humidification of small to medium sized rooms. High-speed
operation will evaporate 1.2 gallons of water (+/- 10%) in 24 hours of continuous
operation. (This assumes room conditions of 70º F and 30% relative humidity.)
LOW MIST SETTING
Operation for quiet, nighttime use or smaller rooms. On Low operation, your
humidifier may run without refilling for extended periods.
TIP: Lower the mist setting or turn off humidifier if moisture forms on walls or
windows.
LOW WATER INDICATOR & AUTO SHUTOFF
When the humidifier detects a low water level the LED around the power icon
will briefly flash red to indicate the water tank needs refilled before automatically
powering off. Refill the tank and power the humidifier back on to resume
operation.
English
13
- Quick Links:
- How to Use
Hide quick links:
Advertisement
Need help?
Do you have a question about the UHT1-SI and is the answer not in the manual?
Questions and answers
How do you fill the tank without the water running Out with the sharper image ultrasonic humififier
To fill the tank of the Sharper Image UHT1-SI ultrasonic humidifier without water running out, follow these steps:
1. Unplug the humidifier and place it on a level surface.
2. Grasp the integrated water tank handle and pull the tank toward you to remove it.
3. Turn the water tank upside down.
4. Remove the cap by turning it counterclockwise.
5. Fill the tank with cool tap water (distilled water is recommended for hard water).
6. Replace the cap by turning it clockwise to close securely.
7. Ensure the cap is tightly sealed before turning the tank upright to prevent leaks.
This method prevents spills and ensures proper operation.
This answer is automatically generated