Removal steps of the built-in battery
Step
Screw (quantity)
3
M2 × 4 mm, flat-head, nylon-coated (5)
When installing:
• Ensure that the connector is attached firmly.
• Ensure that the base cover assembly is secured in place. Otherwise, the battery connection may fail.
• When you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
1110 P-sensor cable (for selected models)
For access, remove these FRUs in order:
44
Lenovo 13w Yoga Gen 2 Hardware Maintenance Manual
Color
Torque
0.181 Nm
Silver
(1.85 kgf-cm)